Illustrated cricket stumps and ball on a green background with the headline Free hit rule explained

A free hit is the delivery that follows any no-ball in men’s ODIs and T20Is. On that ball the batter cannot be bowled, caught, LBW or stumped. The only ways to be out are the ones that also apply on a no-ball: run out, hitting the ball twice, or obstructing the field. The fielding side is not allowed to change its field for the free hit, and since June 2023 any runs scored when the ball hits the stumps count as runs to the batter. There is no free hit in Test cricket.

That is the short version. The detail is where fans, and occasionally fielders, get caught out, so here is how the rule works in practice.

Key takeaways

  • Every no-ball in men’s ODIs and T20Is is followed by a free hit, whatever kind of no-ball it was.
  • On a free hit the batter can only be run out, out for hitting the ball twice, or out for obstructing the field.
  • Fielders cannot change positions unless the batters have swapped ends or a fielding restriction has been broken.
  • If the free-hit ball is itself a wide or a no-ball, the next delivery is also a free hit.

What is a free hit in cricket?

A free hit is a penalty on top of a penalty. When a bowler delivers a no-ball, the batting side already gets one extra run and the ball does not count as one of the six in the over. In limited-overs internationals, the next delivery is then marked as a free hit for whichever batter is on strike to face it.

The point is to make overstepping and other illegal deliveries genuinely costly. A no-ball in a Test match costs one run and one extra ball. A no-ball in a T20 can cost one run, an extra ball and a free swing at a delivery that cannot get the batter out in most of the usual ways. Batters treat it as licence to hit, and in the final overs of a chase that can decide a match.

The free hit is not part of the MCC Laws of Cricket. It comes from the ICC’s playing conditions for ODIs and T20Is, which sit on top of the Laws. That is why you see it in white-ball internationals and the major T20 leagues, but not in Tests or in most club cricket unless the local competition adopts it.

When is a free hit given?

Under the ICC’s men’s ODI and T20I playing conditions, the delivery after any no-ball is a free hit. It does not matter how the no-ball came about. The most common types are:

  • Front-foot no-ball: some part of the front foot must land behind the popping crease. Overstepping is the classic free-hit trigger, and in men’s international cricket front-foot no-balls are now called by the TV umpire.
  • Back-foot no-ball: the back foot must land inside, and not touching, the return crease.
  • Height: a full toss that passes, or would have passed, above the batter’s waist is a no-ball.
  • Too many short balls: ODIs allow two short-pitched deliveries per over and T20Is one. The next one above the limit is a no-ball.
  • Fielding restrictions: too many fielders outside the inner circle during a powerplay or later phase, or more than two fielders behind square on the leg side, makes the delivery a no-ball.
  • Other illegal deliveries: an illegal action, a ball that bounces more than once or rolls along the ground before reaching the batter, a ball that pitches off the cut strip, and the wicketkeeper or a fielder interfering before the ball reaches the batter.

It was not always this broad. When free hits arrived in international cricket in October 2007, only foot-fault no-balls earned one. The ICC widened the rule in 2015 so that every no-ball, including those for height and fielding breaches, is followed by a free hit.

How can a batter be out on a free hit?

The playing conditions say the striker can be dismissed on a free hit only in the circumstances that apply for a no-ball. In practice, that leaves three modes of dismissal:

Mode of dismissalPossible on a free hit?
BowledNo
CaughtNo
LBWNo
StumpedNo, even if the free hit is called wide
Hit wicketNo
Run outYes
Hit the ball twiceYes
Obstructing the fieldYes
Based on the ICC men’s ODI and T20I playing conditions (clause 21), as of November 8, 2026.

The stumping line is the one that surprises people. On a normal wide, a batter who wanders out of the crease can be stumped. On a free hit that is also called wide, they cannot, because the ICC wording says the no-ball dismissal rules still apply “even if the delivery is called wide”. Run-outs are very much alive, though. Batters who sprint for a risky single off a free hit can still lose their wicket, and a direct hit at either end counts.

The field is frozen: what fielders and bowlers can and can’t change

This is the part that shapes tactics most. Once a no-ball has been called, the fielders who were in place for that delivery must stay in the same positions for the free hit. Captains cannot push a fielder back to the boundary or swap two fielders around just because the batter now has a free swing.

There are two exceptions. If the batters have changed ends, so that a different batter is now on strike, the field can be reset for the new striker. And if the no-ball was called for a fielding-restriction breach, the field must be corrected so it is legal again.

The bowler has a little more freedom. They can change their mode of delivery, for example from over the wicket to round the wicket, as long as they tell the umpire in the normal way. They can also use any legal delivery: yorker, slower ball or bouncer, though a bouncer still counts towards the over’s short-ball limit.

Wides, no-balls and runs on a free hit

If the free hit is a wide or a no-ball

The free hit carries over. If the bowler sends down a wide on the free-hit ball, the next delivery is still a free hit. If they overstep again, there is another free hit. In theory a nervous bowler can concede several in a row, and it has happened at the death of T20 games.

If the ball hits the stumps

The batter is not out, and the ball is not dead. Because no dismissal has happened, play continues and the batters can run. Until 2023 any runs taken after the ball deflected off the stumps were recorded as byes, or leg-byes if it hit the pad. The ICC changed that from June 1, 2023: if the ball hits the stumps on a free hit, any runs scored now count as runs to the batter, not extras.

How the umpire signals it

After the usual no-ball signal, the umpire raises one arm straight up and moves it in a circle. That tells the scorers, the players and the crowd that the next ball is a free hit. Broadcasters usually flash a “FREE HIT” graphic as well.

Free hits that made headlines

Two India matches show how the stumps rule plays out under pressure. In an ODI against England in January 2017, MS Dhoni was bowled by Liam Plunkett off a free hit. The ball ran away to the boundary and India collected four byes.

The better-known case came at the MCG in the 2022 T20 World Cup. Needing runs in the final over, Virat Kohli was bowled by a yorker on a free hit that followed a waist-high no-ball. Because he could not be out bowled, the ball stayed live, and Kohli and Dinesh Karthik ran three as it deflected away past the gully fielder. The umpires conferred and confirmed the runs as byes. Wisden later pointed out that under the 2023 change those three runs would have been credited to Kohli instead.

Both incidents caught out players and viewers who assumed the ball goes dead when the bails come off. It does not, and the lesson for fielders is simple: on a free hit, keep chasing the ball. The stakes are even higher in a tie-breaker, where one no-ball can decide the match; our Super Over rules guide explains how those six balls work.

How teams play the free hit

Batters

Most batters take a premeditated swing, often clearing the front leg to hit straight or over midwicket, because the usual risks of being caught or bowled are gone. Smart batters also look at the frozen field first. If the captain had a short third man and a deep square leg for the no-ball delivery, the gaps are known before the bowler runs in.

Bowlers

The default answer is the yorker. A full, straight ball at the base of the stumps is the hardest delivery to hit for six, and even if it beats the bat the batter has little time to run. Wide yorkers outside off stump and well-disguised slower balls are the other common options. The worst outcome is a full toss in the slot, and nerves after a no-ball make that more likely than it should be.

Captains

Because the field cannot be changed, captains in the death overs often set fields that will still work for a free hit, with protection on the boundaries the bowler expects to be targeted. A single to rotate the strike, on the other hand, frees the fielding side to set a new field for the other batter.

Want to understand other rules that shape white-ball cricket? Read our guides to the LBW rule and the DLS method. Both have been in play during India’s ODI series in New Zealand.

What do you think? Should Test cricket have free hits too? Join the discussion in our CricAmore forums and share your take with fellow fans.

Frequently asked questions

Can a batter be run out on a free hit?

Yes. Run out is one of the three ways a batter can be dismissed on a free hit, along with hitting the ball twice and obstructing the field.

Is there a free hit in Test cricket?

No. In Tests a no-ball costs one run plus any runs scored and an extra delivery, but the next ball is not a free hit. Our no-ball rule explainer covers every type of no-ball.

Can the fielding team change the field for a free hit?

Only if the batters have changed ends, or if the field has to be corrected after a fielding-restriction breach (our powerplay rules explainer covers those limits). Otherwise fielders must stay where they were.

What happens if the ball hits the stumps on a free hit?

The batter is not out and the ball stays in play. Since June 1, 2023, any runs scored after the ball hits the stumps are credited to the batter.

Sources: ICC playing conditions (clause 21), Wisden, Outlook India, cricket.com.au, Wikipedia

4 Comments

Comment

New Report

Close