Illustrated stadium floodlights and a red cricket ball with the headline Super Over rules explained

A Super Over is cricket’s tie-breaker for limited-overs matches. When a T20 or ODI finishes level, each team bats one extra over of six legal balls, with three batters and a maximum of two wickets. The team that scores more runs in that over wins, no matter how many wickets it lost. If the Super Over is also tied, another one is played, and that repeats until there is a winner. The old boundary-count rule that decided the 2019 World Cup final no longer applies.

That is the short version. The detail, from who bats first to which ball is used, is where matches are won and lost. This guide explains the ICC procedure as of November 10, 2026, the history behind it and the tactics captains use.

Key takeaways

  • Each side bats one over with three batters; two wickets end the innings.
  • The team that batted second in the match bats first in the Super Over.
  • A tied Super Over is followed by another, with new restrictions on bowlers and dismissed batters, until there is a winner.
  • Boundary count-back was scrapped by the ICC in October 2019, after the World Cup final.

When is a Super Over used?

A Super Over is played when a limited-overs match ends with both teams on the same score. It is standard in men’s and women’s T20 internationals and in franchise leagues such as the IPL. In ODIs it is used in ICC tournaments, and it has also appeared in bilateral one-dayers, such as the West Indies v Bangladesh ODI in October 2025. Test cricket has no Super Over: a tied Test stays a tie.

A tie is not the same as a no-result. If rain washes out a match before a result is possible, there is no Super Over. And in a rain-shortened chase, a tie on the Duckworth-Lewis-Stern par score can also lead to one; our DLS method explainer covers how those targets are set.

Super Over rules: the ICC procedure step by step

The ICC’s playing conditions set out the procedure in detail. These are the main points.

Timing and set-up

  • The match referee fixes the start time; it normally begins five minutes after the match ends.
  • It is played on the match pitch unless the umpires, ground authority and referee agree otherwise.
  • The umpires stay at the ends where they finished the match.
  • Only players nominated for the match can take part, including any concussion replacement already used.

Batting, bowling and the ball

  • The team that batted second in the match bats first.
  • Each batting side nominates three batters. The innings ends after six legal balls or when two wickets fall.
  • The fielding side chooses which end to bowl from.
  • The fielding captain picks a ball from the umpires’ box of spare balls, which includes the match balls but no new ones. The team fielding first chooses first; the other team may use the same ball.
  • Fielding restrictions are the same as for the last over of the match, so in a T20I that normally means up to five fielders outside the 30-yard circle.
  • Wides, no-balls and free hits work exactly as in the main match. Extras count towards the total.

Reviews

Where DRS is in use, each team gets one unsuccessful review per Super Over innings, regardless of how many reviews it used in the match itself. Teams that burned both reviews in the 20th over still start the Super Over with one.

If the Super Over is tied

  • Another Super Over follows, normally five minutes later.
  • The team that batted second in the previous Super Over bats first.
  • Each side bowls from the opposite end to the one it used before.
  • A batter dismissed in an earlier Super Over cannot bat again. A batter who was not out can.
  • The bowler who bowled the previous Super Over cannot bowl the next one.

When time runs out

The process is not endless. The extra time available is the greater of 20 minutes or whatever remains of the match’s scheduled finish plus its extra time. If weather or delays push beyond that, the Super Over is abandoned and the match stays a tie. A home board can also cap the number of Super Overs in a bilateral series, for example on double-header days, but only if it tells both teams before the series begins.

QuestionRule
Who bats first?The team that batted second in the match
How many batters?Three nominated; two wickets end the innings
Who picks the end?The fielding side
New ball?No; chosen from the box of match and spare balls
DRS?One unsuccessful review per innings
Tied again?Repeat until there is a winner
Same bowler next time?No, not in consecutive Super Overs
Counts in career stats?No
Super Over rules at a glance, based on ICC playing conditions (as of November 10, 2026).

From bowl-out to boundary count: how the rule evolved

Early T20 internationals settled ties with a bowl-out, a penalty-shootout style contest where bowlers aimed at unguarded stumps. India famously beat Pakistan that way at the 2007 World T20 in Durban. It was entertaining but had little to do with real cricket, and from 2008 the Super Over replaced it. The first in an international came in a T20I between New Zealand and West Indies on December 26, 2008, and West Indies won it.

For years a tied Super Over was settled by boundaries: first the total number of boundaries hit in the match and the Super Over, then further count-backs. That rule became headline news on July 14, 2019. England and New Zealand tied the World Cup final at Lord’s, both scored 15 in the Super Over, and England took the title having hit more boundaries, 26 to 17.

The reaction was strong enough for the ICC to change course. In October 2019 it scrapped the boundary count, so in ICC events a tied Super Over is now followed by another until someone wins. The October 2019 change did allow a tie to stand in a group-stage match where conditions say so, but knockout matches must produce a winner.

Famous Super Overs

MatchDateWhat happened
England v New Zealand, World Cup final, Lord’sJuly 14, 2019Super Over tied 15-15; England won on boundary count, the last time that rule decided a major match
India v Afghanistan, 3rd T20I, BengaluruJanuary 17, 2024First double Super Over in a men’s T20I; India won the second
Nepal v Netherlands, T20I, GlasgowJune 16, 2025First triple Super Over in international cricket; Netherlands won the third
South Africa v Afghanistan, T20 World Cup, AhmedabadFebruary 11, 2026Double Super Over; South Africa won the second 23-19
Selected Super Overs. Sources: ICC, ESPNcricinfo, Wikipedia records.

The India v Afghanistan match is worth remembering for another reason. Both Super Overs were needed because the first ended 16 apiece, and it exposed how the “dismissed batters can’t return” rule shrinks a team’s options quickly. By the second, captains are choosing from whoever is left.

Super Over tactics: how captains approach it

Six balls magnify every small decision. Here is what teams weigh up.

  • Choosing the batters. Teams usually send their two cleanest strikers plus a third who can hit from ball one. A left-right pair can disrupt the bowler’s line and field placings.
  • Choosing the bowler. The specialist death bowler with a reliable yorker is the default. Mystery spin is a gamble that sometimes pays off, because batters have no time to settle.
  • Picking the end. The fielding side chooses, so bowling with the shorter square boundary behind the bowler’s stronger side, or into the wind, can save a run or two.
  • Picking the ball. An older, softer ball from the box is harder to hit cleanly. Remember that the side fielding second may use the same ball.
  • Thinking ahead. In a knockout, a captain should know who would bowl a second Super Over, since the first bowler cannot.
  • Batting second. The chasing side knows the exact target, so it can take fewer risks. Unlike the toss in the main match, though, captains do not get to choose: the rules fix the order.

Extras matter enormously. A wide adds a run and a ball; a no-ball adds a run and a free hit. One loose delivery in a Super Over can be worth more than a dropped catch in the main match. Our free hit rule guide and powerplay rules explainer cover those conditions in detail.

Common Super Over myths

  • “The team with fewer wickets lost wins a tied Super Over.” No. Wickets are irrelevant; only runs count, and a tie means another Super Over.
  • “The bowler of the 20th over can’t bowl it.” He can, in the first Super Over. The restriction only applies to the same bowler in consecutive Super Overs.
  • “Super Over runs go into a player’s record.” They do not. Runs and wickets in a Super Over are excluded from career statistics.

What do you think? Join the discussion in our CricAmore forums and share your take with fellow fans.

Frequently asked questions

How many wickets are allowed in a Super Over?

Two. Each side nominates three batters, and the innings ends as soon as two are out, even if balls remain.

What happens if the Super Over is tied?

Under current ICC rules another Super Over is played, and this repeats until there is a winner, unless time runs out. Boundary count-back has not been used since October 2019.

Who bats first in a Super Over?

The team that batted second in the main match. In any further Super Over, the team that batted second in the previous one bats first.

Is there a Super Over in Test cricket?

No. A Test that ends with scores level is recorded as a tie. The Super Over is only for limited-overs matches.

Sources: CricTracker (ICC Super Over guidelines), ICC Standard T20I Playing Conditions (via Sri Lanka Cricket), Wikipedia: Super Over, LatestLY

2 Comments

Comment

New Report

Close