Illustrated cricket pitch with stumps and ball beside the headline Powerplay rules explained for ODI and T20 cricket

A powerplay is simply a block of overs in limited-overs cricket when the fielding side must keep most of its fielders inside the 30-yard circle. In men’s ODIs that means a maximum of two fielders outside the circle in overs 1–10, four in overs 11–40 and five in overs 41–50. In T20 internationals, only two fielders may go out in the first six overs, and five after that. Break the limit and the umpire calls a no-ball. Everything else about powerplays, from rain-reduced games to the Big Bash “Power Surge”, builds on those numbers.

Below we explain the current rules format by format, how they have changed, and why the tactics in each phase look so different.

Key takeaways

  • ODIs have three phases: 2 fielders outside the circle (overs 1–10), 4 (overs 11–40) and 5 (overs 41–50).
  • T20Is have one powerplay: overs 1–6 with only 2 fielders outside, then a maximum of 5.
  • Since July 2025, shortened T20Is calculate the powerplay to the nearest ball, so an 8-over game has a 2.2-over powerplay.
  • Too many fielders outside the circle means a no-ball, and in limited-overs cricket every no-ball brings a free hit.

What a powerplay actually restricts

A fielding side has nine fielders apart from the bowler and wicketkeeper. Around the pitch, umpires mark an oval roughly 30 yards (27.43 metres) from the middle, usually with discs or a painted line. That oval is the “fielding restriction area”.

Powerplay rules cap how many of those nine can stand outside the oval when the ball is bowled. Fewer boundary riders means more gaps for lofted shots, so batters are encouraged to attack. The inverse also matters: if only five fielders can go out in the final ODI phase, at least four must stay in the ring, which keeps the single available even at the death.

One separate restriction applies at all times in every format: no more than two fielders may stand behind square on the leg side. That law exists to stop negative leg-side bowling with a packed on-side field; it is not part of the powerplay, but the two often get confused. Our guide to cricket fielding positions explains where each fielder stands.

ODI powerplay rules: the three phases

The current men’s ODI structure has been in place since series starting on or after July 5, 2015. Here is how an uninterrupted 50-over innings is divided:

PhaseOversMax fielders outside the circleWhat usually happens
Powerplay 11–102New-ball swing, openers attack over the infield
Powerplay 211–404Spin, strike rotation, building a platform
Powerplay 341–505Yorkers, slower balls, boundary hitting
Men’s ODI fielding restrictions for a full 50-over innings (ICC playing conditions).

The 2015 reforms also removed two older features. The batting powerplay, a five-over block the batting side could call, was scrapped, and captains no longer had to keep two fielders in catching positions during the first ten overs. The second change matters more than it sounds: bowling sides now often set a sweeper or a deeper point in the opening overs instead of a second slip, especially on flat pitches.

When rain shortens an ODI, the phases are shortened too, and the match officials confirm the revised overs before play resumes. Targets in those games are set by the DLS method, which already accounts for overs and wickets lost, so a shorter powerplay is part of the same calculation fans see on the scoreboard.

T20 powerplay rules

T20 internationals keep it simple. Overs 1–6 are the powerplay, with no more than two fielders outside the circle. From the seventh over to the 20th, up to five can go out. The IPL and most other T20 leagues use the same six-over structure.

Shortened T20s: powerplays now counted in balls

Rain used to create awkward cases in T20 cricket because powerplays were rounded to whole overs. Under the ICC’s men’s T20I playing conditions introduced in July 2025, the powerplay in a reduced game is calculated to the nearest ball instead. The table below shows the published figures, written in overs.balls:

Overs per inningsPowerplay lengthOvers per inningsPowerplay length
51.3113.2
61.5123.4
72.1133.5
82.2144.1
92.4154.3
103.0164.5
Powerplay length in shortened men’s T20Is (ICC playing conditions, from July 2025).

The logic is proportional. A full T20 gives 6 powerplay overs out of 20, or 30 per cent. Take 30 per cent of the overs available, convert to balls and round, and you get the table. An eight-over innings is 48 balls; 30 per cent is 14.4, so the powerplay is 14 balls, or 2.2 overs. In practice, the fielding captain can pull fielders back to the rope from the third ball of the third over.

Powerplay variations in leagues

Domestic competitions have experimented with the idea, and fans following overseas leagues will see a few different versions:

  • IPL: the standard six-over powerplay, with two fielders allowed outside the circle.
  • Big Bash League (Australia): the mandatory powerplay lasts only four overs. The batting side then has a two-over “Power Surge” with the same restrictions, which it can take at any point from the 11th over.
  • The Hundred (England): innings are counted in balls, and the powerplay covers the first 25 balls, with two fielders outside the circle.
  • Test cricket: there is no powerplay at all. Captains can place fielders anywhere, subject only to the leg-side rule mentioned above.

The BBL Surge is the most tactically interesting of these. Batting sides tend to call it when set batters are at the crease, and bowling sides respond by holding back their best death bowler for those two overs.

What happens if the fielding side breaks the rule

Umpires count fielders as the bowler runs in. If more players are outside the circle than the phase allows, the square-leg umpire signals a no-ball. That costs a run plus anything scored off the ball, and in ODIs and T20Is the next delivery is a free hit. Since July 2015, every no-ball in limited-overs internationals has carried a free hit, not just front-foot ones.

There is a second penalty that changes fields mid-innings: the over-rate rule. In T20Is since January 2022, a side that is behind the required over-rate must bring one extra fielder inside the circle for the remaining overs. The ICC extended the same in-match penalty to ODIs after the Cricket World Cup Super League ended in 2023. So a team can effectively be playing its “five outside” death overs with only four, which is a real cost when the batters are swinging.

A short history of fielding restrictions

Fielding circles began in Australian one-day cricket at the start of the 1980s, born from the World Series Cricket experiments of the late 1970s. By the 1992 World Cup they were a standard part of ODI cricket, and the opening 15 overs of that era produced a famous tactic: pinch-hitters sent in to slog over the infield.

The word “powerplay” arrived in 2005, when the ICC split the restrictions into a mandatory ten overs plus two five-over blocks chosen by the fielding side. From 2008 the batting side controlled one of those blocks. In 2011 the floating powerplays were confined to overs 16–40, and in 2012 they were reduced to one block, with only four fielders allowed out in normal overs. The 2015 changes produced the clean three-phase system used today.

Each tweak tried to fix the same problem: the “dead” middle overs, when teams milked singles against spin and nothing much happened. The current four-out rule in overs 11–40 is the compromise. It gives bowlers enough boundary protection to attack, while forcing at least five fielders into the ring.

Tactics: how teams use each phase

For batters

In the first powerplay, the two outfielders are usually at fine leg and third man, or at deep point and deep square. Smart openers read where the two are and hit to the other side. Against a new ball that is swinging, though, the best ODI openers often wait three or four overs before taking risks, because an early wicket lets the fielding side relax for 40 overs.

Watch for how teams use the “ninth to tenth over” moment in ODIs. Many batters try one big over just before the restrictions lift, knowing the field will spread on the 11th.

For bowling captains

Captains have to decide whether to chase wickets or contain. Slips cost runs in the powerplay because they take a fielder out of the ring, but a wicket in the first six overs of a T20 is often worth more than any economy rate. Spinners bowling in the T20 powerplay, once rare, are now common: a finger spinner turning the ball away from a big hitter with only two men back can be very hard to attack.

In the final ODI phase, five men on the boundary invite the yorker and the wide line outside off stump. The four inside the ring are there to stop the easy single and keep a new batter on strike.

What to watch on TV

  • Count the fielders outside the circle at the start of each over; you will spot field changes before the commentators mention them.
  • Check the powerplay score against the final total. In T20 cricket, a slow powerplay is very hard to recover from.
  • Look at the over-rate. A team falling behind can lose a boundary fielder at the worst moment.

What do you think? Join the discussion in our CricAmore forums and share your take with fellow fans.

Frequently asked questions

How many overs is the powerplay in an ODI?

The first, most restrictive powerplay lasts ten overs, with a maximum of two fielders outside the circle. Overs 11–40 allow four outside and overs 41–50 allow five.

How many fielders can be outside the circle in a T20 powerplay?

Two, during the first six overs of a full 20-over innings. After the powerplay, up to five fielders can stand outside the circle.

Is there a powerplay in Test cricket?

No. Test captains can set any field they like, apart from the general limit of two fielders behind square on the leg side.

What is the batting powerplay?

It was a five-over block of fielding restrictions that the batting team could choose to take in ODIs. The ICC abolished it in July 2015.

Sources: BCCI – new ODI rules (2015), Outlook India – T20I powerplay change, Sportskeeda – over-rate fielder penalty, Khel Now – BBL Power Surge, Wikipedia – Powerplay (cricket)

5 Comments

Comment

New Report

Close